Mecer ME-10000-WPTU, 10KVA Online Smart Tower 3 Phase UPS

• Model: Mecer ME-10000-WPTU
• Type: Online Double Conversion UPS,
• Topology: True Online Double Conversion
• Form Factor: Tower
• Phase: 3-Phase Input / Single-Phase Output

Capacity:

• Power Capacity: 10KVA / 9KW
• Input Voltage Range: 305 – 478VAC (3-Phase, based on load)
• Input Frequency Range: 46 – 54Hz or 56 – 64Hz (Auto Sensing)
• Output Voltage: 220/230/240VAC (Selectable)
• Output Frequency: 50Hz or 60Hz (Selectable, Auto-Sensing)
• Power Factor: 0.9

Battery:

• Battery Type: External Battery Bank (Battery configuration may vary)
• Battery Voltage: 192VDC (16 x 12V batteries in series)
• Backup Time: Dependent on external battery bank size and load
• Recharge Time: 4-6 hours to 90% capacity (with standard battery configuration)
• Battery Management: Intelligent Battery Management System

Features:

• Efficiency: Up to 92% in Online Mode, 97% in ECO Mode
• Waveform Type: Pure Sine Wave
• Transfer Time: Zero (Online Double Conversion)
• Noise Level: < 58dB at 1 meter
• LCD Display: Yes (displays input/output voltage, frequency, battery level, load level, etc.)
• Audible Alarm: Yes (overload, battery low, etc.)
• Communication Ports: USB, RS232, SNMP (optional)
• ECO Mode: Yes (energy-saving mode)
• Cold Start Function: Yes (starts the UPS without utility power)
• Auto Restart: Yes (automatically restarts the UPS when AC is recovering)

Protection:

• Overload Protection: Yes
• Short Circuit Protection: Yes
• Surge Protection: Yes
• Overcharge Protection: Yes
• Deep Discharge Protection: Yes
• Input/Output Isolation: Yes (ensures electrical noise isolation)

Physical Specifications:

• Dimensions (W x D x H): Approximately 260 x 570 x 717 mm
• Weight: Approximately 69 kg (excluding external batteries)

Environmental:

• Operating Temperature: 0°C – 40°C
• Operating Humidity: 20% – 90% RH (non-condensing)
• Storage Temperature: -25°C – 55°C

Certifications:

• Safety Compliance: CE, ISO 9001

Additional Features:

• Hot-swappable Batteries: Yes (if battery cabinet is used)
• Bypass Mode: Yes (Automatic and Manual Bypass)
• Remote Monitoring: Optional via SNMP (requires additional SNMP card)
• Parallel Operation: Yes (supports parallel redundancy)
• Generator Compatibility: Yes (compatible with generators)